How to use electrode paste
The electrode paste is a continuous self-baking electrode in use and consumption
The electrode paste is a continuous self-baking electrode in use and consumption. In use, the outer layer is a cylinder made of 1-2 mm thick steel plate.
The electrode paste is periodically added to the cylinder, and as the production progresses, the electrode paste is gradually softened-melted-fired. When calcined, a large amount of volatiles are released. After entering the electrode conductive clip portion, the semi-coking to complete coking due to the high temperature action, and finally becoming the conductive carbon electrode, the electrode paste is baked into a conductive electrode by various heats of the electric furnace itself, so it is called a self-baking electrode.
During the working of the electrode, a cylinder is connected to the top of the electrode at intervals, and a certain amount of electrode paste is added, and this is repeated.
-
Article Tags:
”Ferro nickel electrode paste“,”Ferro chromium electrode paste“,”Ferro silicon
www.chinaelectrodes.
2022-03-23 01:58:10Generally, when the cathode carbon block is lower than its roasting temperature, it shows a positive coefficient of thermal expansion as the temperature increases, while the ramming paste will shrink from curing temperature to the maximum roasting temper
www.chinaelectrodes.
2022-03-21 03:57:32From 1954 to 1976, calcined petroleum was widely used in aluminum plants. On the one hand, the carbon plant of aluminum factory produces anode paste, using local materials; On the other hand, there were no more effective pastes.
www.chinaelectrodes.
2022-03-19 13:55:29An important index to measure the performance of calcined pet coke is the content of volatiles in calcined pet coke. If the content of volatiles in calcined pet coke is too high, the shrinkage ratio of raw anode will be large in the roasting process, and