The electrode paste engineer of our factory inspects the Hamadan Ferroalloy Plant in the Middle East
In October 2018, our factory's electrode paste international sales staff and electrode paste craftsmen inspected end users in the Middle East. During the inspe
During the inspection, our factory business staff held friendly talks with end users on the use of electrode paste.
In the end, users added 300 tons of electrode paste orders.
[electrode paste, many people choose Rongxin Carbon]
Gongyi Rongxin Carbon Products Co., Ltd. was established in 1992 and has developed into a large carbon production enterprise with an annual output of 200,000 tons of electrode paste and 250,000 tons of forged coke.
In the course of Rongxin Carbon's development, it has experienced many difficulties and has also gone through a detour. However, with the basic concept of honesty management, Rongxin Carbon has grown stronger and stronger. Rongxin carbon products are not only sold well in China, but also exported to Indonesia, Iran and other countries. They are recognized and praised by the international market.
[electrode paste, why do we do better]
There are 500 electrode paste production enterprises nationwide, and more than 100 production enterprises with a scale of more than 10,000 tons. Among so many electrode paste production factories, why Rongxin Carbon has done better in terms of production scale and reputation.
This starts from the development of Rongxin Carbon. Rongxin Carbon was established in 1992. It was originally a carbon enterprise mainly engaged in the calcination of petroleum coke. In 2006, Rongxin Carbon electrode paste production line was put into operation. The production of electrode paste requires heat to soften the Raw materials. General electrode paste factories need gas generators at this stage, and in time after coal is converted to gas, more expensive natural gas is needed. However, because our calcined coke production line can release a lot of free heat, and this heat is just used by the electrode paste production line. Therefore, compared with more general electrode paste manufacturers, we have saved a lot of costs in terms of heat generation.
[electrode paste purchase, please be careful when encountering these problems]
There are some small factories in the market. In order to capture orders and make false reports, they often do whatever they can.
A customer in Anyang, Henan, received a quotation of 2550 per ton from an electrode paste factory in Ningxia. After the actual start of supply, the customer regretted it. The electrode broke off every two days, and the manufacturer was indifferent. After the actual resistance measurement, the resistance actually reached 97uΩ.
Therefore, we must recognize the factory. If the price is too low to maintain the cost, how can we provide a genuine electrode paste.
[Physical and chemical index of electrode]
Ash content: <5%
Density:> 1.46g / cm3
Pressure coefficient:> 23Mpa
Shape: egg-shaped, trapezoidal, cylindrical.
Packaging: Tonnage or export packaging. According to customer requirements.
Note: The parameter is the limit value reached by our factory. Please contact us for details.
[electrode paste, Rongxin carbon products leading 20%]
Unit consumption refers to the mass of electrode paste consumed per unit alloy finished product.
In the application of the electrode paste produced by our company in the manganese-silicon furnace, under the same condition of the furnace, the electrode paste can be reduced by 20% compared with the same period last year. For example, two 15,000 furnaces consume 200 tons of electrode paste from other manufacturers each month, and Rongxin carbon electrode paste consumes about 160 tons. (Real case) and there were no accidents during use.
Effectively reducing the unit consumption greatly reduces the production cost of alloys. If electricity costs and labor are added, the profit of alloy production will be increased by almost 20%.
[electrode paste, Rongxin Carbon helps customers to solve U-turn accident]
Every year, Rongxin Carbon receives a lot of demand for electrode pastes of ore furnaces in accidents. There are U-turns, hard breaks, and soft shorts. There are problems with the quality of the electrode paste, there are defects in the furnace itself, and they are caused by misoperation by workers.
It was an accident of a U-turn of the electrodes.
The electrode turn is actually the place where the arc should have occurred. It's like writing with a pencil, using too much force and breaking. Of course, in a mine furnace, excessive force will not occur. The best explanation for the U-turn of the electrode is that the adhesion of the electrode paste after sintering is low and shedding occurs. At this time, it is a good solution for the electrode paste factory to increase the softening point of coal tar. Of course, there is a gap between the prices of medium-temperature asphalt and high-temperature asphalt. As a factory, it should be tested several times to improve the bonding strength of the electrode.
[electrode paste, world-class is our responsibility]