Shape Selection of Electrode Paste for Submerged Arc Furnace

Shape Selection of Electrode Paste for Submerged Arc Furnace

Shape Selection of Electrode Paste for Submerged Arc Furnace

  • BY:www.chinaelectrodes.
  • 0
  • 1
In our actual production, some customers need trapezoidal electrode paste, some need spherical shape, and some need columnar body. Know that although the shapes are different, the recipes are all the same.

In our actual production, some customers need trapezoidal electrode paste, some need spherical shape, and some need columnar body. Know that although the shapes are different, the recipes are all the same. So why are there different shapes?

Regardless of the shape of the electrode paste, it will eventually be added to the submerged arc furnace, and these electrode pastes will eventually be fired into electrodes to release heat. The main reason for their different shapes is the construction of submerged arc furnaces.

In more detail, different electrode paste shapes depend on the fins in the submerged arc furnace. It can be said that the strength sheet restricts the descending speed of the electrode paste to a large extent, to be precise, the firing speed of the electrode. The shape of the electrode paste is determined by the different structure of the film.

However, from our experience, spherical electrode paste is the most shipped product. The main reason is that the spherical electrode paste itself is smaller, and the electrode gap after firing is smaller and denser.

 

No matter what type of electrode paste is produced, Rongxing Carbon adheres to the spirit of craftsmanship and will never allow any unqualified electrode paste product to leave the factory.

 

  • Article Tags:

  • Share on :

Comments

  • img

    www.chinaelectrodes.

    2022-03-23 01:58:10

    Generally, when the cathode carbon block is lower than its roasting temperature, it shows a positive coefficient of thermal expansion as the temperature increases, while the ramming paste will shrink from curing temperature to the maximum roasting temper

  • img

    www.chinaelectrodes.

    2022-03-21 03:57:32

    From 1954 to 1976, calcined petroleum was widely used in aluminum plants. On the one hand, the carbon plant of aluminum factory produces anode paste, using local materials; On the other hand, there were no more effective pastes.

  • img

    www.chinaelectrodes.

    2022-03-19 13:55:29

    An important index to measure the performance of calcined pet coke is the content of volatiles in calcined pet coke. If the content of volatiles in calcined pet coke is too high, the shrinkage ratio of raw anode will be large in the roasting process, and

Leave a reply

Name*

Phone*

Email*

Content*